IP Security Camera User Manual

July 8, 2017 | Author: Ada Weaver | Category: N/A
Share Embed Donate


Short Description

1 IP Security Camera User Manual IPCAMHD62 For video setup guide and FAQs - Go to2 RESET Product Structure Diagram louds...

Description

IP Security Camera User Manual

IPCAMHD62 For video setup guide and FAQs - Go to www.serenelifehome.com

Product Structure Diagram Photosensitive Sensor Lens IR LED Microphone

loudspeaker

Wireless

Wired network

Network

Status Light

Status Light POWER LED

Wireless Antenna

RESET

RESET

Ethernet

DC5V Power Port External Input /Output

FN Button Audio Input /Output Micro SD Card Slot

Note: FN button has no function at this time

Don't forget to register your camera with us online to get a free 1 year manufacturer's warranty! Just go to www.SereneLifeHome.com

‘SereneViewer’ APP Installation A.Scan 'SereneViewer' APP QR code or search to download the app.

iOS

Andriod

Setup an Account Username Click “Sign Up”

Create your camera username -6 characters min -Do not use email address

Note: This user name will be used to access all of your cameras from the app or PC.

Create an account password - Click “Sign Up” Note: This will be used to log in to all of the cameras on your account and can be separate from the camera password 9:17 Back

User name must be at least 6-20 characters and must begin with a letter.

yanfa10 ●●●●●●

●●●●●●

Password is 6-20 alphanumeric characters

Sign up

Add Camera to APP 1. Enter 'Device List' and click '+' icon at the top of left corner. Then scan the device ID QR code.

Connect to Your Network Choose method 1 or 2 for setup

Method 1: Wired Setup -Connect power, Ethernet cable and the wireless antenna as above. -Wait 50 seconds for( ) indicator on the camera to flash green -After scanning QR code - select the “Ethernet Connection” option

Moden/Router

Power Outlet

Method 2: Wi-Fi connection -Make sure you are in the same room as your wireless router and plug camera into power -Wait 1-2 min for camera boot up, watch for the WiFi indicator on the front of the camera to flash green and red alternating. -If WiFi only flashes red - perform a hardware reset to change the camera back to Wireless setup mode. If still only red follow “Method 1 Wired Setup”

Router Power

Phone

Web Access: After setting up your camera on the mobile phone - you can use your account username and password to access the cameras from any device with an internet browser

Log on to the website:

http://cloud.serenelifehome.com/

Passwords Should you happen to forget a camera's individual password you can reset it by performing a hardware reset. Just use a pin to press and hold the reset switch for 12 - 15 seconds. The camera will reboot and run through pan and tilt.

If you forget your account password you will need to register a new account and pair the cameras again. Accounts are never associated with an email address for password recovery

Mobile App Layout The main screen is your device list. You will see a thumbnail preview for all cameras added to your account. Use this menu to -Switch between different cameras -Add new devices -Access and change app global settings

App settings

Add device

You can change your user admin

Add your cloud camera to your account through the icon.

and guest password and check the app software version. 25

Alarm messages Shows which cameras have detected motion.

Camera View Page This page give you access to all camera specific actions and settings -Hold the phone vertically or horizontally to switch between full screen mode -Swipe left and right on the video to reposition the camera -Spread two fingers apart to zoom in

Sound Activate to hear your cameras surroundings

Image Settings

Microphone

and more.

Activate to talk through your

Set color, contrast, image res

camera’s speaker.

Local video Snap photo Saves a photo to your phone’s local memory

View the video records and alarm messages Click the icon to view the video recording and alarm message.

Records the live video direct to phone memory. This feature only works while app is open. See “SD recording” for background recording options.

Camera Recordings Enter into the interface of “information and video viewing” can see the alarm information and video of storage device(Micro SD or cloud box), users can quickly search the information and video by choose the time or category.

Local Shows photos and videos recorded to the phone memory

Calendar Icon Skip to a specific date and time..

Records Shows photos and videos stored on the SD memory card Drag the screen down to load.

Device settings This screen allows you to check and set camera specific settings. If you see the red dot icon - a firmware update is available. Install available firmware updates to ensure the camera features are working as intended.

About Check the camera's software version and ID number.

Network Can set up the camera

Storage Device Connecting Cloud Box for storage

Wi-Fi connection .

Motion and Notification Set the motion detection alarm.

Schedule recording Set the recording schedule start and end time.

Recording Your Camera You can choose 3 options for storing recordings for your camera 1) Local storage This is the most simple method - just point and shoot. This only works while The phone app is open and running and will take up memory on your phone. 2) SD storage Install an SD card and open up a world of possibilities! Choose between scheduled recording, motion detection triggered recording or just let it run! The oldest videos will be overwritten to make room for the newest. You can download and save the videos from the mobile or website. 3) CloudBox storage Sometimes SD storage just doesn’t cut it. With a limit of 32g and the fact that the videos are stored directly in the camera - many people prefer the peace of mind the CloudBox can bring. Purchase the cloud box and back up 2TB of video storage from any device on a single network and check the videos from the same login. Find the CloudBox for sale on Amazon now! Search “SereneLife CloudBox”

SD Recording Note: Make sure you have a class 10 SD Micro Card 32G or less. Format must be FAT32. 1) Insert SD Card into your camera 2) Go to > camera settings > SD Card in the mobile app 3) Slide to Enable the SD card 4) Click "Format" to Erase any card data - wait for the camera to reboot

Note: If the card capacity does not show data after reboot. Power down your camera and plug back into power while the SD card is already inside the camera.

Next you can choose your record trigger preferences between A) 24/7 recording - camera always records B) Scheduled recording - camera records during specified time frame C) Motion detection recording - camera only records when motion is detected To enable option A or B - Go to the camera settings and select "Schedule Recording" Here you can enable 24 hour mode or set specific time frames during which the camera will record.

To set up "Motion Detection Recording - Go to the camera settings > "Motion Detection" Once enabled, you can select to trigger camera recording and image snapshots

You can also change the "Pre-record length" which will add "X" number of seconds before the motion was detected to the video file saved.

Motion Detection and Notifications You can set notification settings separately for any camera in your account. To access the notification settings, select your camera, and go to the settings tap - then scroll down to "motion detection”

Slide the slider to enable motion detection You can then choose what actions you would like to occur when your camera detections motion. -I/O alarm will send a signal to any equipment you have attached to the camera I/O output ports -Snap Shot will record a still image to the SD card in your camera -Record will record video to the SD card while the camera detects motion. -You can also turn push notifications on and off by selecting "turn alert on" or "turn alert off" If you are finding your camera is alerting you needlessly or failing to alert you if someone is moving, you can adjust the sensitivity for motion detection for the camera.

Troubleshooting Can’t connect to WiFi -Connect the ethernet cable and check connection is working -Go to “camera settings” > “network” Check the WiFi status is enabled and “List” displays your home network - doublecheck the password. -In the Ethernet tab - disable the ethernet connection to force the camera to look for available WiFi network Still having trouble? -Try deleting the camera entry from your account -Hardware rest the camera -Add the camera as a new device SD Card is not recognized by the camera -Check the card is class 10 - 32g or less -Insert the card while the camera is powered down then power up -Try reformatting the card using your computer using “FAT32” -Test multiple SD cards App is crashing - a feature is not working -Check for app updates -Check for camera firmware updates -Contact support with app version, mobile device model and OS version so we can update the app and fix the issue Other issues? Check our FAQ resources and contact support online!

www.SereneLifeHome.com

Troubleshooting Weak Network There are a lot of different variables in your home network that may affect wireless performance including available bandwidth, camera placement, data demands of the camera, and interference. You can use free online tools to help measure your network performance and identify opportunities for improvement. If you are having trouble with your camera connection - first you will want to check if it is a problem with wireless access - wired or both. 1) Run a speed test online from a laptop of desktop connected to your router with a wired connection http://www.speedtest.net/ 2) Now unplug your laptop and run the test again while connected to WiFi. You can move about your home to see if the location you are planning to install the camera has a strong wireless signal -What is your download speed in the same room as your wireless router? -What is the download speed in the location you are trying to install the camera? Is there a significant drop? If your wired connection is too slow to reach the bandwidth requirements of the camera you may need to consider upgrading your internet service. If you have a significant drop in data when testing a wireless connection in the same room as your router, you may want to consider upgrading to a router that can provide higher data transmission speeds If you see a significant drop in data when testing in the area you want to install your camera you can either look for an upgraded router that will offer additional range or you can expand your router range with a signal booster.

Don’t miss out! Free 1 year Warranty Find the product registration form on our website www.SereneLifeHome.com

View more...

Comments

Copyright � 2017 SILO Inc.